No products in the cart.
Buying Guide
Best Buying Guide for Water Purifier – 7 Things to consider
Table of Contents
Introduction – Buying Guide for Water Purifier
As we all know, buying a water purifier is not an easy task. There are many factors that have to be considered before you make up your mind about the same. But once you buy a purifier, it is almost sure that you will use it on a daily basis. That’s when all the hard work of buying becomes worth it.
Not everyone knows how to properly choose a water purifier, so in this buying guide for water purifier we have revealed top 7 things you need to consider that will help you make an informed decision when purchasing one. There are numerous options out there, but some of them might not be efficient in removing all types of contaminants that could lead to illness.
Types of Purification Technology used in Water Purifier:
Reverse Osmosis (RO) Technology
Electricity is required to run RO water purifiers. Impurities are removed using a thin (0.0001 micron) semi-permeable membrane. It eliminates all of the germs and microorganisms in the water by killing them and removing their remains.
The dissolved salts can be successfully eliminated using RO purifiers. These water purifiers require additional power to raise the water pressure because they cannot operate at regular water pressure.
These include a pre-filtration system to get rid of the dirt. Additionally, harmful substances like fluorides, arsenic, lead, and mercury are eliminated. However, these filters change the taste of the water, so it could take some getting used to.
Ultraviolet (UV) Technology
One of the technologies that is most well-liked by customers is UV purification. Ultraviolet (UV) rays are used in this purification technology to remove impurities. Although it is well known that UV rays may efficiently destroy dangerous germs and microorganisms, they are unable to remove dissolved salts.
It does not remove dissolved pollutants and is suitable for water with low TDS. Additionally, a UV purifier preserves the water’s flavour. UV technology is frequently used in conjunction with RO technology since the killed bacteria are still suspended in the water. On the plus side, UV filters can operate with regular water pressure.
Ultrafiltration or Gravity Based Technology
In order to purify water, a gravity-based purifier utilizes the concept of gravity in connection with a filter. Since it doesn’t need electricity, this water purifier is a perfect choice for small towns and villages or locations with little water needs.
There are various components to this purifier. All impurities are left behind when water is transferred from one area to another. To get rid of parasites and viruses that cause disease, it has a module with activated carbon. Some gravity purifiers additionally use an ultrafiltration membrane that has 0.1 micron-sized holes for filtering microorganisms. You are reading this buying guide for water purifier on trusted site – babyswingstore.com
Alkaline Technology
Alkaline technology is primarily used to fight the acidic water that can be harmful to your health. These make the water alkaline by neutralising the acid that is already present in it.
The pH level of the water is raised by alkaline water purifiers, making it suitable for drinking. Since this filter does not require energy, it is an additional choice for those who lives in regions with electricity issues.
Electro-Adsorption Technology (EAT)
The five-step electro-adsorption process uses various filters with variable filtration capabilities to remove different levels of impurities. First, it removes suspended particles, silica, grime, and dust. Ion, cyst, germ, and bacterium removal comes next.
The removal of dangerous substances including lead, arsenic, chlorine, and pesticides is the last step. This technology also lessens water waste and is ideal for TDS levels under 500 ppm.
Top 7 Things to consider – Buying Guide for Water Purifier
Storage tank capacity
It needs to keep clean water in storage for later use. A large storage tank is a crucial component in places where the supply of electricity is unstable. Make sure to verify that the tank’s construction uses non-toxic, food-grade materials. Stainless steel tanks are available with the newest purifiers.
TDS (total dissolved solids)
You should understand and analyze the water quality provided to your home before deciding which filter would work best for you. Within the same city, the water quality varies according on location. The amount of TDS (total dissolved solids) in the supply should be taken into account.
A specific supply could be hard and include several chemical impurities, such as sulphates, nitrates, and magnesium, which are invisible to the unaided eye. The supply may even be clearly tainted, filthy, and odorous at another location. The technique and purifier required to eliminate certain toxins will vary depending on the level of impurity.
Typically employed in RO purifiers, the TDS controller regulates output TDS levels. It is possible to utilize it to keep the necessary minerals in water at healthy levels. You are reading this buying guide for water purifier on babyswingstore.com
Activated Carbon Filter
Chlorine and organic pollutants like pesticides are removed using an activated carbon filter. It gets rid of the organic substances that give water a terrible taste and an unpleasant smell. For ultimate filtration and flavour improvement, a carbon post filter is used.
Membranes and Filters
UF membranes eliminate suspended and minute soil contaminants. RO membranes get rid of biological contaminants, heavy metals, and dissolved salts. UV filters render parasites, germs, and viruses inactive.
Everyday Usage
Your household’s daily water needs are a crucial factor to take into account. A purifier with a bigger capacity and more output would be needed if the need was higher. Purchasing a purifier with less capacity than needed might make people wait. Non-electric purifiers often have a lower capacity.
Maintenance and repairs
Since a purifier is used frequently throughout the year, adequate maintenance is obviously going to be needed. A purifier must be frequently maintained and cleaned since the water output will directly impact the customers’ health. An ideal service schedule for a high-tech water filter is once every four months.
Budget
The last and the most important thing to consider in this buying guide for water purifier is budget. The first focus is going to be choosing a product that fits your budget. It is not a good idea to get a purifier that exceeds your spending limit. Going for a high technology purifier is useless if the purifying is already being done by a lower technology purifier finely enough for the water supply in your location.
Set your budget based on all of your needs, then choose a brand that offers the finest quality at fair pricing. In addition to the cost of the water purifier, take into account the customer care services you will need during the purifier’s lifespan as you define your budget.
Conclusion – Buying Guide for Water Purifier
Whether you live in a city or on the countryside, it is important for you to have a purifier for the water that you drink. The presence of many harmful microorganisms found in drinking water can cause kidney damage and other diseases. We really hope this buying guide for water purifier has helped you to make a decision.
Learn About
Top 8 Best Washing Machine Under 40000 in India
Top 8 Best Refrigerator Under 25000 in India
About Author
